When zooming on a selected region the top left of that region always remains visable even if your zooming vertically, horizontally or both. If the playhead is not visable Logic will zoom in retaining the center window position. This is useful to know so as not to end up with the same issues I used to have, zooming in on the wrong place!

If you have a trackpad either on a laptop or stand alone trackpad you can use two fingers by pinching outwards to zoom in and inwards to zoom out. Got that? If you have a region selected when using horizontal zoom the window will zoom in on that region.

This is useful if you want to zoom on a region to edit or on the play head set at a location you want to work in. Another way of zooming vertically and horizontally is to use the Apple key along with the arrows keys. Apply Plus up and down zooms vertically. If you want to zoom in on a region to edit use the key.

Select the region and it allows you to instantly zoom in. By hitting the key for a second time the project will zoom back out again. You can highlight a number of regions hit Z and the project will zoom in on the highlighted areas. Hit Z again and it will reset back to where you previously were. You will need to backtrack multiple times to get back to your original position.

Another really useful Zoom feature that is often overlooked but one that I personally find useful is zooming with the playhead.

To do this simply click on the lower section of the ruler but I find it easier and more consistent to click and hold the very top of the playhead where the triangular head is, then hold option and drag the pointer down to zoom in and drag the pointer up to zoom out. This is perfect if you need to quickly zoom in and out around the playhead.

Zoom in, edit and zoom out to continue on the project! Moving along and scrolling around the project is another useful way of getting from A to B I use Shift in combination with the Scroll Wheel so that I can scroll along to wherever I need to be. Personally I find this a really useful way of getting around. A great way to move quickly from one part of a project to another is using Go To Position.

I find myself able to create music with relative ease that the other DAWs just are not capable of. The MIDI capabilities alone are second to none in Logic and the ability to compose music in all styles makes it the best of the best.

Another huge plus is the constant and free updates Apple provides… updates that are really upgrades in the quality and number of plug-ins and soft instruments built into the program.

Composing music or just recording a band is easy with this software. Whether you are into acoustic, jazz, electronica or rock, this software package is the best there is and gets updated constantly by Apple. Apple takes this software very seriously and I commend them for their excellence. Version However, it does have on issue now with Flex Pitch and Flex Tim.

Total disaster when only trying to use Flex Pitch and not edit the time. When you turn off Flex and Follow, all of your time and pitch corrections disappear. I just want to use flex. Nothing can fix this. I have been looking in Apple Forums and trying to find a solution for about a week now.

The artifacts that now happen when using flex are so bad the audio almost becomes unusable. Toggle navigation Pcmacstore. Features and Description. Have a nice day! More apps by Apple. Apple Configurator 2.

 
 

Logic pro x vertical zoom shortcut free download.10 Shortcuts To Working Faster In Logic Pro X

 

Drag the Horizontal Zoom slider left to zoom out for a wider view, or drag it right to zoom in for a close-up view. Drag the Vertical Zoom slider up for a wider view more tracks , or drag it down for a close-up view fewer tracks. If the Tracks area grid value is set to Automatic, the units shown on the ruler change when you zoom in or out.

In Logic Pro, click and hold the Waveform Zoom button in the Tracks area menu bar, then drag the slider vertically to zoom in or out. You can speed up your workflow by using the Save and Recall Zoom Setting key commands.

Because I change snap modes so often, I have set aside four shortcuts to toggle between the different snap modes. We walk through the complete process of recording vocals, from reviewing the roles of each piece of gear to connecting your microphone to your DAW. Both beginner and experienced users will want to take a look at the Advanced Preferences to take full advantage of what this powerful DAW can do.

Back to Splice. Splice Let your creativity flow. Learn more Sign up. Splice Blog logo. This will zoom the height of the selected track, but not the width. Which can be nice for seeing the waveform more clearly on audio parts for example.

Another benefit is that when this is toggled on, you can simply select another track in your project, which then will be zoomed in height. Sometimes you will want to zoom into a specific section of your song, and that is when the zoom to fit locators can come in handy. The cycle area does not have to be turned on for this to work, you simply need to make sure your left and right locators are placed where you want them.

Because sometimes you will mess up the zoom, and knowing that you can always use this command to go back to the previous zoom setting, in several steps, can be a blessing many times.

 

– Logic pro x vertical zoom shortcut free download

 

Time is precious and the programmers of Logic Pro know that, so virtually all aspects of the software can be controlled by your keyboard; it can virtually become a control monitor. Used in combination with the letter keys they make up the majority of key commands but I know you know that already. This is pain because you either have to scroll endlessly to find the position you were looking for in the first place or zoom out and start again.

When zooming on a selected region the top left of that region always remains visable even if your zooming vertically, horizontally or both. If the playhead is not visable Logic will zoom in retaining the center window position.

This is useful to know so as not to end up with the same issues I used to have, zooming in on the wrong place! If you have a trackpad either on a laptop or stand alone trackpad you can use two fingers by pinching outwards to zoom in and inwards to zoom out.

Got that? If you have a region selected when using horizontal zoom the window will zoom in on that region. This is useful if you want to zoom on a region to edit or on the play head set at a location you want to work in. Another way of zooming vertically and horizontally is to use the Apple key along with the arrows keys. Apply Plus up and down zooms vertically. If you want to zoom in on a region to edit use the key.

Select the region and it allows you to instantly zoom in. By hitting the key for a second time the project will zoom back out again. You can highlight a number of regions hit Z and the project will zoom in on the highlighted areas. Hit Z again and it will reset back to where you previously were.

You will need to backtrack multiple times to get back to your original position. Another really useful Zoom feature that is often overlooked but one that I personally find useful is zooming with the playhead.

To do this simply click on the lower section of the ruler but I find it easier and more consistent to click and hold the very top of the playhead where the triangular head is, then hold option and drag the pointer down to zoom in and drag the pointer up to zoom out. This is perfect if you need to quickly zoom in and out around the playhead. Zoom in, edit and zoom out to continue on the project! Moving along and scrolling around the project is another useful way of getting from A to B I use Shift in combination with the Scroll Wheel so that I can scroll along to wherever I need to be.

Personally I find this a really useful way of getting around. A great way to move quickly from one part of a project to another is using Go To Position.

In this case bar 4, next hit ok and the playhead will jump to bar 4. A quick and easy way to effortlessly make big leaps around a project. If you want to quickly move a region to where the playhead is simply hit ; key.

Titting ; moves a region to where ever the playhead is. One of my biggest frustrations was setting up a Cycle Region and then wanting to listen to a part of the session that was outside of the cycle area. You can double click along the ruler area to play from wherever you want to, which can be useful.

All you do is select the region or regions you want to play from and whilst holding shift hit the spacebar and Logic will start to play from that region! You can sign up for free guides right now that will help to improve and enhance your Logic mastering skills. So there you have it! The difficult part is remembering them but you could always right them down and refer back to them or pop back and visit Mastering In Logic again soon to remind yourself of these great timesaving shortcuts.

If you liked this article and want to learn more about Logic X sign up to Mastering In Logic and receive more great tutorials to help you on your way to creating the perfect Logic Pro X productions.

Sign up right now by clicking here! Email will not be published. Top Menu Blog. Leave a Reply Click here to cancel reply. Comment Name Email will not be published Website.

The loudness war To master or not to master? Updates VI’s. How loud can you go!